The highly sporty, competitive slalom sail with unbelievable forward pull - the S_PACE craves for speed and yet is easy to handle. It carries the racing genes of the WARP for unrestricted power delivery, but at the same time the handling is extraordinarily simple for this class. The based is the revolutionary 3 IN 1 DESIGN that Kai has developed over a period of 3 years, which allows an unprecedented trim range. Together with the three brand-new HYPER CAM 2.0, a tremendously wide range of use is the result: Adjusting the S_PACE trim for low- or high end conditions fundamentally changes the sail, which makes it possible to achieve maximum performance across all wind conditions!
The new S_PACE featuring the 3 IN 1 DESIGN is the perfect symbiosis of our most successful race slalom and freeride sails: whether V-Max, maximum acceleration or used as a sporty foil engine, the S_PACE is the most versatile cam sail on the market. With this sail designer Kai Hopf combines the top performance of the WARP with a very balanced sailing behaviour and a much wider range of use. This is achieved through a greatly reduced and almost straight luff curve in the upper area. This causes changes in the luffing tension to have a very large effect on the leech. Low downhaul tension results in a very tight leech, high tension leads to a very pronounced loose leech. The two extremely far apart positioned MIN and MAX trim points are proof of testament that the 3 IN 1 DESIGN covers an incredibly wide wind range. On top the S_PACE shows a completely different high- or low end performance and sail character depending on the trim. On MIN setting with tight leech, it’s supper effective to pump, accelerates very efficiently and feels incredibly light - ideal also for foiling. On MAX trim, however, the S_PACE feels very similar to the WARP, constantly getting faster without limits. Three new, length-adjustable HYPER CAMS 2.0 ensure unique draft- and profile stability yet smooth rotation.
Particularly noticeable is the highly tapered luff sleeve in the AERO SLEEVE DESIGN 2.0. Its width in the aerodynamically important boom area enables the optimal transition from the “thick” mast leading edge to the “thin” sail body. However, at the top of the sail the luff sleeve has remained relatively narrow to enable fast water starts. This is supported by the LUFF LIFT DESIGN of the WARP 20.20, which provides additional lift.
Simply awesome: When used for foiling the S_PACE features a special clew eyelet to be able to position the sail even more upright!
IN ADDITION TO THE 3 HYPER.CAM 2.0 THE NEW SLEEVE INDUCER IMPROVES THE AERODYNAMICS AND STABILITY WITHOUT HAVING ANY INFLUENCE ON THE HANDLING
MODIFIED PROFILE DISTRIBUTION >> IMPROVED ROTATION, STABILIY AND ACCELERATION
LUFF CURVE GOT OPTIMISED >> LIGHTER FEELING AND IMPROVED PLANING POWER
At DUOTONE we use a Medium Constant Curve for our masts (our bend percentages range between 61-63 bottom and 75-77 top depending on model and length). As this curve sits right in the middle within Constant Curve masts it offers the biggest compatibility of any bend curve. This makes our masts and sails the most compatible on the market.
HERE IS HOW GOOD OTHER BRAND MASTS WORK WITH OUR SAILS AND VICE VERSA:
Most customers change their individual sail and mast sizes according to demand and therefore end up owning a quiver with different brands. When building up your personal sail quiver, you should try to combine sails that have a similar feel and behavior. The one decisive factor defining how similar or different one sail feels/behaves to another is the position of the draft, in both levels, vertical (high><low) and horizontal (forward><back).
Basically there are 2 different kind of wave sails:
So when mixing your quiver with different sails/brands you should try to combine sails which have a similar draft position and thus feeling and behavior.
Just follow these guidelines:
3 IN 1 DESIGN
For an unprecedented trim range and an extremely wide wind range
HYPER CAM 2.0
Completely new and technically superior: the camber revolution with adjustable length - for optimised rotation and increased performance
AERO SLEEVE DESIGN 2.0
Maximum performance combined with fast waterstarting
HOLLOW LOWER LEECH
Enables to reduce the bottom length without loosing low end power
iBUMPER 2.0
The most advanced and effective molded mast protector
iROCKET 2.0
Factory calibrated individual batten tensions using a torque wrench
With the information overkill nowadays no one has the time to read manuals anymore. Therefore we try hard to design our products as intuitive as possilbe to get you onto the water faster than with any other product. No wonder DUOTONE is called the feature world champ.
Here are some examples:
Our motto is clear: light is right but only if it doesn't go to costs of durability.
Our hardware products (booms, masts and extensions) are proven to be the lightest in the industry.
With our sails though we are not the lightest on the market (with the exception of the Super Hero M.Plus). The major reason for this is that we are using (much) thicker XPly laminates than some other brands.
The factors of puncture resistance, UV weathering resistance and stretch evidently depend ONLY on the thickness of the film used.
Puncture resistance and stretch have a linear relation to the thickness of the film. Means twice the thickness results in twice the strength against punctures with half the stretch.
Even more critical is UV resistance since here the relation to the thickness is overproportional. Means half the thickness reduces the UV-longevity by nearly 70%!
Some brands use XPly laminates which are 2/3rd thinner than ours in the upper sail area. Yes in the top you have less puncture issues and you can even get away with the increased strech. Unfortunately though the UV-exposure is the same all over the entire sail.
That's one of the reasons why the majority of Windsurf centres around the globe trust in DUOTONE products.
Eliminating stretch and loss of tension. If it’s good enough for safety belts, it’s good enough for windsurfers! We are the only manufacturer to use only polyester webbing for the (vario) top and the tack roller. This advantage of this compared to conventional polypropylene is the negligible amount of stretch. As a result even brand new sails will retain full luff tension and will not need subsequent trimming.
Sizes in Meters
6.0 | 6.6 | 7.3 | 7.8 | 8.3 | 8.8 | 9.3
Duotone Windsurf Sails comes from H20 Sports supplied with a sail bag.
Warranty: Duotone sails also come with a 2+3 year warranty (excluding monofilm). To secure warranty claims fully, please remember to register at www.duotonesports.com straight after your purchase. Otherwise, only statutory warranty claims will be accepted. This is valid only for original owners.
Thinking of a package? Mast, boom and extension. Call the team on 01202 733744 for the latest Duotone offers.
Duotone S Pace Windsurf Sail 2022
You must be logged in to review a product. Click here to login or register if you don't already have an H2O Sports account.
You won't be able to dismiss this by usual means (escape or click button), but you can close it programatically based on user choices or actions.