2mm Custom Omni 2.0 Wetsuit Boots
Couldn't load pickup availability
Ultimate Warm-Water Protection
Recommended Water Temps: 15C/60F+
FULL DESCRIPTION
The 2mm Custom Omni 2.0 has been completely redesigned for even more durability and protection while still delivering Solite's unmatched barefoot performance. The Omni excels in aquatic activities where foot protection takes precedence over board feel.
KEY FEATURES
3D Molded 3mm Gum Rubber Sole
Like all of our new 2.0 Series boots, the 2mm Omni features a one-piece, 3D molded natural rubber sole. The Omni outsole is 3mm thick (versus 1mm on the Reef Boot). The extra sole thickness emphasizes comfort and protection for walking to/from/in the water. Our sticky/flexible gum-rubber compound offers maximum traction on wet, uneven surfaces and natural flexibility for barefoot-feeling while walking. The sole wraps up the toes and heel for increased durability and protection against rocks, urchins, and reef.
Custom-Fit 2.0 Thermofoam Sole
Our patented heat-moldable 2.0 Thermofoam Sole has also been completely redesigned including a more comfortable Mini-Split internal split toe. The Mini-Split is 1cm shorter than our prior internal split, improving fit and comfort for a wider variety of toe shapes while still maintaining precise control. The Thermofoam Sole is 4mm thick in the toes/heels for extra protection and 3mm elsewhere to avoid over-heating in tropical waters.
Breathable Ventiprene Upper with EZ-O Cuff
To prevent excess waterflow into the boot, the 2mm neoprene upper is made from Ventiprene, with microscopic holes allowing the feet to breathe and stay cool without letting in water. This keeps your feet lighter for optimal quickness and dexterity. The Ventiprene foam is lined with our most abrasion-resistant Tuff-Skin exterior lining and a quick-dry interior. We've had so much success with our EZ-O cuff design on our other boots, we adopted the design to our low-cuff styles. The EZ-O cuff provides a flush-resistant, low-bulk, seamless seal around the ankle without the need for cords or toggles.
Reinforced Stealth-Loop
To ease on/off, we've integrated our low-profile Stealth Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption.
SIZE GUIDE
Sizing Tip: Order your regular shoe size or half a size down, as they expand to fit when moulded. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.
CHOOSING THE RIGHT SIZE
Solite Boots provide the absolute best performance, comfort, and warmth if they are sized and fit correctly. Here are some tips to make sure you get the correct size boots for optimum fit:
If you have Average/Wide Feet:
You should purchase your sneaker size or half a size smaller. Solite Boots should fit tight out of the box, but the heat molding process will stretch them to the perfect size. If your boots feel too big out of the box in any dimension (length/width/arch), then we suggest you try a size down. Even if they feel tight out of the box, heat molding will expand the boots to a snug but comfortable fit.
NOTE: If you plan to use the 1mm neoprene Heat Booster Socks inside your boots, you may not have to size down. In fact, if you have wide feet you may even want to size up half a size if you plan to use the 1mm neoprene Heat Booster Socks. For example, if you are a wide size 10.5 and plan to use the 1mm neoprene Heat Booster Socks, a size 11 may be a better fit. This is particularly applicable to the 5mm boots, which won't stretch in heat-molding as much as 3mm boots.
If you have Narrow/Low-Volume Feet:
You can go down 1 size from your sneaker size. By heat-molding, the boot will stretch to fit your length, and narrow/reduce volume to hug your narrower foot. Once again, the 3mm Boots will stretch more easily in heat-molding than the 5mm boots, so keep this in mind when choosing.
HEAT MOLDING INSTRUCTIONS
Solite Boots are the world's first and only custom, heat-moldable watersports footwear. Custom fitting can be done in your kitchen with nothing more than a kettle of boiling water. To heat-mold your Solite boots, watch the video below and follow the instructions carefully. Do not use any other methods of heat molding except boiling water. Use of ovens, microwaves, heat guns, etc. will void your warranty.
STEP-BY-STEP
1. Bring water to a boil (you will need approximately 3 cups of boiling water per boot.)
2. While water is heating, roll down the cuffs of your Solite boots and place them in a sink.
3. Put on your Solite Heat Booster socks. These socks will help allow for a little extra space when the boots are being molded.
4. Once water comes to a full bubbling boil, gently pour into your Solite boots (in the sink), filling each to slightly below the seam where the neoprene upper is attached to the sole. See photo.
5. Wait 5 minutes for the boiling water to soften the sole material.
6. After 5 minutes, carefully pour out the hot water from your Solite boot (doing one boot at a time) and quickly rinse out the inside of the boot with cold water to lower the surface temperature and to prevent burning. Test with your hand as you will want to get your foot in as warm as you can comfortably stand.
7. Place your foot inside your Solite boot while wearing the Heat Booster sock (if you plan to wear the socks inside the boots). Make sure your big-toe sits comfortably in the toe cavity and your heel is flush in the heel pocket.
8. Repeat Steps 6 and 7 for the other boot.
9. Secure boot ankle straps if you have them.
10. Walk around in your Solite boots for the next 10-15 minutes, to ensure a comfortable fit while the material cools and molds to your foot shape.
11. Once your Solite Boots have cooled to room temperature, the molding process is complete. 5-7 minutes.
12. If you are unhappy with the fit, you can re-mold your Solite boots repeating the same steps above. Your Solite boots should feel completely comfortable, almost like part of your foot.
- PRODUCT INFORMATION
- FULL DESCRIPTION
- KEY FEATURES
- SIZE GUIDE
- DELIVERY & RETURNS
Ultimate Warm-Water Protection
Recommended Water Temps: 15C/60F+
The 2mm Custom Omni 2.0 has been completely redesigned for even more durability and protection while still delivering Solite's unmatched barefoot performance. The Omni excels in aquatic activities where foot protection takes precedence over board feel.
3D Molded 3mm Gum Rubber Sole
Like all of our new 2.0 Series boots, the 2mm Omni features a one-piece, 3D molded natural rubber sole. The Omni outsole is 3mm thick (versus 1mm on the Reef Boot). The extra sole thickness emphasizes comfort and protection for walking to/from/in the water. Our sticky/flexible gum-rubber compound offers maximum traction on wet, uneven surfaces and natural flexibility for barefoot-feeling while walking. The sole wraps up the toes and heel for increased durability and protection against rocks, urchins, and reef.
Custom-Fit 2.0 Thermofoam Sole
Our patented heat-moldable 2.0 Thermofoam Sole has also been completely redesigned including a more comfortable Mini-Split internal split toe. The Mini-Split is 1cm shorter than our prior internal split, improving fit and comfort for a wider variety of toe shapes while still maintaining precise control. The Thermofoam Sole is 4mm thick in the toes/heels for extra protection and 3mm elsewhere to avoid over-heating in tropical waters.
Breathable Ventiprene Upper with EZ-O Cuff
To prevent excess waterflow into the boot, the 2mm neoprene upper is made from Ventiprene, with microscopic holes allowing the feet to breathe and stay cool without letting in water. This keeps your feet lighter for optimal quickness and dexterity. The Ventiprene foam is lined with our most abrasion-resistant Tuff-Skin exterior lining and a quick-dry interior. We've had so much success with our EZ-O cuff design on our other boots, we adopted the design to our low-cuff styles. The EZ-O cuff provides a flush-resistant, low-bulk, seamless seal around the ankle without the need for cords or toggles.
Reinforced Stealth-Loop
To ease on/off, we've integrated our low-profile Stealth Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption.
Sizing Tip: Order your regular shoe size or half a size down, as they expand to fit when moulded. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.
CHOOSING THE RIGHT SIZE
Solite Boots provide the absolute best performance, comfort, and warmth if they are sized and fit correctly. Here are some tips to make sure you get the correct size boots for optimum fit:
If you have Average/Wide Feet:
You should purchase your sneaker size or half a size smaller. Solite Boots should fit tight out of the box, but the heat molding process will stretch them to the perfect size. If your boots feel too big out of the box in any dimension (length/width/arch), then we suggest you try a size down. Even if they feel tight out of the box, heat molding will expand the boots to a snug but comfortable fit.
NOTE: If you plan to use the 1mm neoprene Heat Booster Socks inside your boots, you may not have to size down. In fact, if you have wide feet you may even want to size up half a size if you plan to use the 1mm neoprene Heat Booster Socks. For example, if you are a wide size 10.5 and plan to use the 1mm neoprene Heat Booster Socks, a size 11 may be a better fit. This is particularly applicable to the 5mm boots, which won't stretch in heat-molding as much as 3mm boots.
If you have Narrow/Low-Volume Feet:
You can go down 1 size from your sneaker size. By heat-molding, the boot will stretch to fit your length, and narrow/reduce volume to hug your narrower foot. Once again, the 3mm Boots will stretch more easily in heat-molding than the 5mm boots, so keep this in mind when choosing.
HEAT MOLDING INSTRUCTIONS
Solite Boots are the world's first and only custom, heat-moldable watersports footwear. Custom fitting can be done in your kitchen with nothing more than a kettle of boiling water. To heat-mold your Solite boots, watch the video below and follow the instructions carefully. Do not use any other methods of heat molding except boiling water. Use of ovens, microwaves, heat guns, etc. will void your warranty.
STEP-BY-STEP
1. Bring water to a boil (you will need approximately 3 cups of boiling water per boot.)
2. While water is heating, roll down the cuffs of your Solite boots and place them in a sink.
3. Put on your Solite Heat Booster socks. These socks will help allow for a little extra space when the boots are being molded.
4. Once water comes to a full bubbling boil, gently pour into your Solite boots (in the sink), filling each to slightly below the seam where the neoprene upper is attached to the sole. See photo.
5. Wait 5 minutes for the boiling water to soften the sole material.
6. After 5 minutes, carefully pour out the hot water from your Solite boot (doing one boot at a time) and quickly rinse out the inside of the boot with cold water to lower the surface temperature and to prevent burning. Test with your hand as you will want to get your foot in as warm as you can comfortably stand.
7. Place your foot inside your Solite boot while wearing the Heat Booster sock (if you plan to wear the socks inside the boots). Make sure your big-toe sits comfortably in the toe cavity and your heel is flush in the heel pocket.
8. Repeat Steps 6 and 7 for the other boot.
9. Secure boot ankle straps if you have them.
10. Walk around in your Solite boots for the next 10-15 minutes, to ensure a comfortable fit while the material cools and molds to your foot shape.
11. Once your Solite Boots have cooled to room temperature, the molding process is complete. 5-7 minutes.
12. If you are unhappy with the fit, you can re-mold your Solite boots repeating the same steps above. Your Solite boots should feel completely comfortable, almost like part of your foot.
Life is complicated enough, so we've made returning items as simple as possible for mainland UK. Head to your account and click the link for returning items and we'll take it from there. For exchanges, simply select "refund" and re-order the required item again. We'll refund the very moment it's returned to us.
For NI, Channel Islands, Europe and Rest of World, you the customer will need to return the item to us as collections are not possible.
For item's where we've made a mistake or the item is faulty - we'll refund all postage costs on receipt of postage receipt and dispatch replacements items FOC. For items simply no longer required or where you the customer has ordered the incorrect size or product, return postage will not be refunded and dispatching out will be chargeable.
